OTM - Adding site via ethernet option

[wonga316]

i'm attempting to add/connect to multiple sites via OTM with the ethernet option (11c - 61c). how do i find the ip address of the system. i've had a look in LD 117 but i think that it is just the ELAN.

 

[mluckie1]

if you go into ld 137 and stat the elnk it will tell you the current IP address of the switch. You can also use ld 117 that is where you would change the IP address. use the command stat host to get name and IP address of active host.

 

[wonga316]

thx mlukie1. silly question, when you refer to the 'switch' is that the CLAN or the PABX itself?

 

[vztech]

Wonga316

mluckie1 was talking about the PABX.
CLAN is the Customer Lan