I am running a G5 with 10.2.7 and during boot it will get to "Loading IP Firewall Extension" and then I just get a blue screen and the computer is unresponsive. Is there any utilities out there yet that you can use to boot a G5? Last I checked, Nortons stuff wouldn't boot a G5 (but that was a couple months ago) nor would disk warrior. I have already run the Disk Utility Repair Permissions and it didn't help any. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OSX Won't Boot up Completely
- Thread starter btalon
- Start date
I would suggest booting into single-user mode and then troubleshooting from there. I'll try and post key stroke combinations for this in a bit.
What changes were made to the config. after the last successful boot to cause this?
CCNA student
What changes were made to the config. after the last successful boot to cause this?
CCNA student
How to boot into single-user mode.
1. Restart the computer (or turn it on if it's already off) while holding down the command and s keys at the same time
CCNA student
1. Restart the computer (or turn it on if it's already off) while holding down the command and s keys at the same time
CCNA student
- Status
Similar threads
- Locked
- Question
- Locked
- Question