Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OSBX8 upgrade

Eldar Huseynov

Systems Engineer
Jun 26, 2021
10
AZ
Hello, OSBX8 V2 OCC (SDHC card) Upgrade is impossible - the following error occurred during the last attempt to update the software: File not copied because not enough space left on device
How can this problem can be solved?
 
Under Expert mode, Maintenance, Software image, phone images, load, you can delete the current phone software to free up space. It may not be enough but from memory it worked for me once.
 
Under Expert mode, Maintenance, Software image, phone images, load, you can delete the current phone software to free up space. It may not be enough but from memory it worked for me once.
Thanks, I'll try.
 
You can also delete old trace files under Service Center > Diagnostics > Trace > Delete Trace
But your SDHC card has probably some bad sectors l, so you don't have the full capacity anymore and you'd better replace it asap.
The new card will probably be bigger too and after replacing the card you can do the update.

Be aware that V2 is phased out, so you'd better update to the latest V2 (R7.1.1_040) and migrate the system to V3, including replacing the OCCL and probably more hardware.
 
you can upgrade by using knopixx. please note that during upgrade sdhc will be pullout and factory default.
 

Part and Inventory Search

Sponsor

Back
Top