Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OS4K Call Waiting
- Thread starter RICHTz
- Start date
- Thread starter
- #3
FOR AUTOMATIC OVERRIDE or AUTOMATIC CAMPON; the timer:
AUTCMPON ≤ BSYON (xx must be less than or equal to yy).
1. Stn.A dials Stn.B in talk state (busy).
2. A hears busy tone.
3. Timer autcmpon expires.
4. A overrides or campon automatically on B.
but this configuration not correct and for digital phones the caller hear normal ring and the telephone not receive beeb tone to know there is second call.
AUTCMPON ≤ BSYON (xx must be less than or equal to yy).
1. Stn.A dials Stn.B in talk state (busy).
2. A hears busy tone.
3. Timer autcmpon expires.
4. A overrides or campon automatically on B.
but this configuration not correct and for digital phones the caller hear normal ring and the telephone not receive beeb tone to know there is second call.
If the system is HiPath 4000 / OpenScape 4000 / HiCom 300
Then you need to configure a KNOVR and SPLT Button on the phone, the end user then turns on 2nd call/Call Waiting by pressing the KNOVR button.
If this is a different system please advise.
Then you need to configure a KNOVR and SPLT Button on the phone, the end user then turns on 2nd call/Call Waiting by pressing the KNOVR button.
If this is a different system please advise.
- Status