OS 4000 V10R0 - Insert Number when have Incoming Call

[Itusdo]

Dear all,

I'm facing the following problem openscape 4000V10: I want to insert a number before a calling number, when there is a call from extenal.
For example: xxxxxx call to yyyyyy (public number)-> 8000 ringing, I want to 8000 display 80xxxxxx, that is I want to insert the number 80 before xxxxxx.
Can someone help me!

 

[sbcsu]

Try AMO
KNPRE

 

[Moriendi]

Knpre would be used if the change was for ISDN exit codes, or Nat/internat/sub prefixes.

It might fit there, but I think I would use KNMAT for this.

 

[Itusdo]

Hi Sbcsu, Moriendi,

I haven't added KNPRE to the PBX system, I want to create new

 

[sbcsu]

REG-KNPRE;

REG-KNMAT;

Post here

 

[Itusdo]

Hi SBCSU,

I have been created for KNMAT,KNFOR,KNPRE but it didn't worked. Could you check help me, thanks
ADD-KNPRE:0,ISDN,NATIONAL,80,80;
CHA-KNMAT:ISDN,0,1,,106,,A,IN,80,;
ADD-KNFOR:1-1-106,ISDN,UNKNOWN,UNKNOWN,TRANSP,SEND1,SEND1,YES,IGNOR;

DIS-TDCSU:1-1-1-0;
H500: AMO TDCSU STARTED
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = HG3550IP PEN = 1-01-001-0 TGRP = 1 |
|---------------------------------------------------------------------------|
| PROTVAR = ECMAV2 INS = Y SRCHMODE = ASC |
| COTNO = 30 COPNO = 30 DPLN = 0 |
| ITR = 0 COS = 100 LCOSV = 32 |
| LCOSD = 1 CCT = IPTRUNKING DESTNO = 106 |
| SEGMENT = 8 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = TIE |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 31 SATCOUNT = MANY NNO = 1 -1 -106 |
| ALARMNO = 2 FIDX = 1 CARRIER = 9 |
| ZONE = EMPTY COTX = 30 FWDX = 1 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = SIDEA |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729AOPT SRCGRP = ( ) |
| TCCID = SECLEVEL = SECURE |
| HMUSIC = 0 CALLTIM = 60 WARNTIM = 0 |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 GWPROT = NONE |
| DMCALLWD = N |
| SVCDOM = |
| BCHAN = 1 && 20 |
| |
+---------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 20

AMO-TDCSU-111 DIGITAL TRUNKS
DISPLAY COMPLETED;