OS/2 server behind PIX 515

[RADDAD2006]

All,

I have 165 FTP sites exposed to the Internet via my PIX-515 using statics and ACL's .. Now I am tring to allow access to a FTP site running on an OS/2 Warp server. I configured my PIX nearly the same (different IP addr) but I can't get the session to connect. Does OS/2 listen on different ports than win servers? Any assistance would be great !! Thanks !!

PS: I can FTP to the OS/2 server with no problems on the internal network.

 

[boymarty24]

have you added a new static? Maybe you need to to do a clear xlate. But be warned, every connection will be cut then. You have applied the accessgroup command?

 

[RADDAD2006]

Thanks for your reply ..

Yes, I mirrored the setup (different IP's)that I have on the win servers that work fine. I do not block any ports on the internal network which allows for succesful FTP's to the OS/2 server.

Thats why I thought it may require a port different than port 21. Do you know if OS/2 uses the same config as a win server as far as FTP goes?

Thanks again !!

 

[boymarty24]

I dont know if os/2 uses another configuration. I belive not, would be strange if it did. But if you have added a new static you probably will need to refresh the translations. Clear xlate that is. But as i wrote, all existing connections will break.

 

[RADDAD2006]

Xlate has been all cleared .. I wasn't sure if OS/2 had a problem with address nating that the PIX does ..

Thanks again for your assistance .. I will keep poking at it until it works.