Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Optipoint 500 Conversation Volume to low 1

Status
Not open for further replies.

Nick0001

IS-IT--Management
Oct 6, 2017
29
US
Is there anyway to permanently turn up the volume on the Siemens Optipoint phones. I have a couple individuals who are complaining they are having a hard time hearing.
Thanks,
Nick
 
You can set max volume per extn with ACTDA, callvol=7,

Code:
DIS-ACTDA:STN,7777;
H500:  AMO ACTDA STARTED
                                                                                
+------------------------------------------------------------------------------+
| STATION NUMBER 7777                                                          |
+------------+-----------+----------+----------+----------+----------+---------+
|  DO NOT    | VOICE CALL|   RING   |  REP.    |  REMIND  | RINGER-  |  CALL   |
|  DISTURB   | REJECT    |   XFER   |  SECR.   |  HH:MM   | CUTOFF   | WAITING |
+------------+-----------+----------+----------+----------+----------+---------+
|            |     X     |          |          |          |          |         |
+------------+-----------+----------+----------+----------+----------+---------+
| VARIABLE RING TIME: 0                                                        |
+------------------------------------------------------------------------------+
| INDIVIDUAL TIMERS FOR CIRCUIT AND OSMO USERS                                 |
| FORWARD TO VOICE MAIL : 0                                                    |
| CLIENT RING DURATION  : 0                                                    |
| DESK RING DURATION    : 0                                                    |
| CELL RING DURATION    : 0                                                    |
+------------------------------------------------------------------------------+
| INDIVIDUAL SETTINGS FOR OPTISET AND OPTIPOINT500:                            |
| RINGVOL : 4     RINGSOUN: 2          ALERTVOL: 2     CALLVOL: 1              |
| SPKRVOL : 4     ROOMCHAR: NORMAL     DISPCONT: 2     ROLLVOL: 3              |
| SLKCONT : 2                                                                  |
+------------------------------------------------------------------------------+

AMO-ACTDA-111       SUBSCRIBER FEATURES                                         
DISPLAY COMPLETED;
  <add-actda:type=stn,stno=7777,featcd=optiset
RINGVOL = 
RINGSOUN = 
ALERTVOL = 
CALLVOL = 
SPKRVOL = 
ROOMCHAR = 
M16: COMMAND PROCESSING ABORTED


If that still isn't loud enough, then the problem is the user not the phone, and they might be better with a headset where they can make it even louder. TREF amo can increase by -4dB but it'll be system wide. You have to specify a from and to for TREF, ie, from CO trunk to digital extn, from anate to digital extn etc etc. I would try ACTDA first.
 
You are the best! Thank you this helped my hard of hearing users.

Nick
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top