Optipath 3550 1

[meanmofo]

Hi there
I don't normally work on these systems but have been handed a job to make a few changes.
I need to either connect via serial and make programming changes or can use the main handset if needed.
Does anyone have a link to the manager software?
Is there a default password?
Anyone got a copy of the prog manual?
I have done a search but am not getting very far.
TIA
Mofo

 

[sbcsu]

Hi,
As you know the HiPath 3550 can be programmed using the main phone *9531994/31994
And/Or the Serial interface.

Program to install and documentation/help files are available at

https://hipath.tonidoid.com

Click on Guest Login
Username:hipath4000
Password:hipath4000

The program is located in folder 150 300 OSB
and documentation is located in Docs / 150 3000 OSB

When the program is installed the default username/password is 31994 31994
It may be different on your system but that is the default mostly used

 

[meanmofo]

Thanks a million sbcsu
I will give it a crack and see what happens.

 

[meanmofo]

hi sbcsu
Managed to get into the PBX via the main phone. Thanks for your help.
Manager software worked up until it queried the username and password then crashed. I use an XP laptop.
Have you had issues with the software at all?

 

[sbcsu]

Hi,
It should ask you the username/password at the start
just put in
Username:31994
Password:31994
On the phone you have to put in the extra *95 at the start to get into the programming mode
XP Should be OK as far as I know