Good Morning,
I purchased a second hand option 11c cabinet and was looking to configure it as a homelab with simple use which I have had some success with so far thanks in part to helpful people on this forum.
I have been trying to get a bunch of the old programming off of it and keep getting these error messages repeatedly every 15 seconds or so which makes it very disruptive to keep track of things. How do I solve this?
Any help is appreciated. Thanks!
Thanks,
werman
I purchased a second hand option 11c cabinet and was looking to configure it as a homelab with simple use which I have had some success with so far thanks in part to helpful people on this forum.
I have been trying to get a bunch of the old programming off of it and keep getting these error messages repeatedly every 15 seconds or so which makes it very disruptive to keep track of things. How do I solve this?
Code:
TMDI210 1
IOD040 03
BERR705 EXC 0: Bus Error in Task "tSL1" (0x207ec2a0)
SR=0x3008, PC=0x10f42cb6, Addr=0xb000c150, SSW=0x105
BERR705 EXC 0: Bus Error in Task "tSL1" (0x207ec2a0)
SR=0x3008, PC=0x10f42cb6, Addr=0xb000c150, SSW=0x105
Any help is appreciated. Thanks!
Thanks,
werman