Option x, midnight routine 1

[MBX]

I need to configure digital phantom stations on my option 11 and option 81 PBX's and stop the midnight routine from deleting the phantom stations. Here is the hard part; I cannot build these phantoms on phantom TN's because they must be digital phantoms and I can only provision analog sets on the phantom TN's. I must build a digital phantom that I can AST enable (control through Symposium call center).
Thanks in advance!

 

[Reusser]

You can build it on an active loop - available card slot. You will need to take LD 30 out of the midnight routines.
LD 17
Req: Chg
Type: OVLY
DROL: x30

This will prevent the switch from disabling the port.

 

[MBX]

Great! Thanks Reusser!
I'll give this a try.
David

 

[kristiandg]

The other thing that works well is to build a Digital DATA port (TN Port +16) on an existing phone (that isn't going anywhere).

Hope this helps...

Kris