Hello,
I would greatly appreciate any assistance.
I have SPN of "1586123456#" (# will cover digit 0 through 9) programmed in my PBX.
I have added "1586123456" to my NRS.
I setup DCH messaging on SITE-A (making the call) & SITE-B (receiving the call).
I see the call attempt on SITE-A DCH messaging, but then gets rejected with "NO ROUTE TO DESTINATION".
It appears the NRS does not like my entry. Details are below:
PBX
---
SPN 1586123456 (I have tried using "15861234560" with no success as well.)
FLEN 0
CLTP NONE
RLI 62
SDRR NONE
ITEI NONE
NRS
---
DN Type: Private Level 0 (CDP)
DN Prefix: 1586123456 (I have tried using "15861234560" with no success as well.)
Route Cost: 1
I would greatly appreciate any assistance.
I have SPN of "1586123456#" (# will cover digit 0 through 9) programmed in my PBX.
I have added "1586123456" to my NRS.
I setup DCH messaging on SITE-A (making the call) & SITE-B (receiving the call).
I see the call attempt on SITE-A DCH messaging, but then gets rejected with "NO ROUTE TO DESTINATION".
It appears the NRS does not like my entry. Details are below:
PBX
---
SPN 1586123456 (I have tried using "15861234560" with no success as well.)
FLEN 0
CLTP NONE
RLI 62
SDRR NONE
ITEI NONE
NRS
---
DN Type: Private Level 0 (CDP)
DN Prefix: 1586123456 (I have tried using "15861234560" with no success as well.)
Route Cost: 1