Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

option 61 rejecting calls

Status
Not open for further replies.

bkelly1676

Technical User
Feb 24, 2006
109
US
i am having troubles with rejected calls, when i call the number and it is not in use everything works bus as soon as line 1 is in use all other calls to that number are rejected and the caller gets a "line is disconnected" message. below is the d-channel monitoring in ld 96. both calling numbers are me testing, the first went through fin but the second was rejected

DCH 0 UIPE_IMSG CC_SETUP_IND REF 00003380 CH 8 1 TOD 13:32:16
CALLED #:5646400 NUM PLAN: E164
CALLING #:xxx5302037 NUM PLAN: E164

DCH 0 UIPE_OMSG CC_PROCEED_REQ REF 0000B380 CH 8 1 TOD 13:32:16

DCH 0 UIPE_OMSG CC_ALERT_REQ REF 0000B380 CH 8 1 TOD 13:32:16
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 0 UIPE_OMSG CC_SETUP_RESP REF 0000B380 CH 8 1 TOD 13:32:20
PROGRESS: TERMINATING END IS NOT ISDN

DCH 0 UIPE_IMSG CC_SETUPCOMP_IND REF 00003380 CH 8 1 TOD 13:32:20

DCH 0 UIPE_IMSG CC_SETUP_IND REF 00003400 CH 8 3 TOD 13:32:22
CALLED #:5646400 NUM PLAN: E164
CALLING #:xxx3533036 NUM PLAN: E164

DCH 0 UIPE_OMSG CC_REJECT_REQ REF 0000B400 CH 8 3 TOD 13:32:22
CAUSE: #1 - UNASSIGNED NUMBER

DCH 0 UIPE_OMSG CC_DISC_REQ REF 0000B380 CH 8 1 TOD 13:32:32
CAUSE: #16 - NORMAL CALL CLEARING

DCH 0 UIPE_IMSG CC_RELEASE_IND REF 00003380 CH 8 1 TOD 13:32:32
 
what is the hunt pattern on that number?

john poole
bellsouth business
columbia,sc
 
this is the MARPed phone for the main number. this is a random problem, it works about 75% of the time and i have never duplicated the problem with an on switch call.

DES RECEPT
TN 012 0 01 02
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 5644700
TGAR 0
LDN NO
NCOS 1
SGRP 0
RNPG 1
SCI 0
SSU 0000
LNRS 16
XLST 2
SCPW
CLS CTD FBD WTA LPR PUA MTD FNA HTA ADD HFA
MWA AAD IMD XHD IRA NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA
ICDA CDMD MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHA FITA CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD PGND FLXD FTTU
CPND_LANG ENG
RCO 0
HUNT 5644700
LHK 3
LPK 5
PLEV 02
FCAR NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 5646400 0 MARP
CPND
NAME Melrose Apartments
XPLN 27
DISPLAY_FMT FIRST,LAST
VMB
VMB_COS 6
SECOND_DN 5016400
THIRD_DN 5026400
VMB_STATE CONFIGURED
01 SCR 5009996 D MARP
CPND
NAME MELROSE APARTMENTS
XPLN 27
DISPLAY_FMT FIRST,LAST
02 SCR 5009997 D MARP
CPND
NAME MELROSE APARTMENTS
XPLN 27
DISPLAY_FMT FIRST,LAST
03 SCR 5009998 D MARP
CPND
NAME MELROSE APARTMENTS
XPLN 27
DISPLAY_FMT FIRST,LAST
04 SCR 5646417 0 MARP
05 SCR 5646402 0
CPND
NAME RECEPTION
XPLN 27
DISPLAY_FMT FIRST,LAST
VMB
VMB_COS 6
SECOND_DN
THIRD_DN
VMB_STATE UPDFAIL
06
07
08 TRN
09 AO6
10 DSP
11 DIG 1 11 V
12 ADL 16
13 PRK
14 CFW 8 94
15
DATE 5 FEB 2007
 
I should also add that when this problem happens it happens with all lines but is most noticed on thise line since it has the most traffic.
 
we have tried everything with the phone, we later found that it is with any line the the second call gets dropped. another note is that i have go as far as replacing the MSDL card and the T-1 card as well. this will work about 75% of the time then all at once no secondary calls will go through.
Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top