Option 11c won't even give > prompt. 4

[optionwhat]

I can't logi or anything else since it just keeps cycling through the stuff below. I removed all the cards except the digital line card. Any help would be greatly appreciated.


SYS000 0400 0003 0800 00
SYS0010 8 0
SYS0010 8 1
SYS0010 9 0
SYS0010 9 1
SYS0010 12 0
SYS0010 12 1
SYS0010 13 0
SYS0010 13 1
DATA FROM CARTR.
SYST. CORE EDD
CARTR. EDD
SYSLOAD RELEASE 21.44
DONE
INI000 0000 00 00 00 0000 0000 0003 0800 0000
EHM300 01
DSET000 DOWN LOAD 741 0 80 0 0 0 0 5168
INI002 0083 0088 0084 0085 0086
INI003 00AF 00B0 00B4 00B8
ERR225 0 5
€€€€
>
AMLM024 08

AMLM024 04

AMLM024 05

AMLM024 06

CSA001 9 0:00:02 1/04/1993 4
XMI002 7 €XDLC
AMLM024 08

AMLM024 04

AMLM024 05

AMLM024 06

CSA001 9 0:00:32 1/04/1993 4
DROL000 TDS LD34 BEGIN 00:01 1/4/1993

DROL001 TDS LD34 END 00:01 1/4/1993

DROL000 CED LD35 BEGIN 00:01 1/4/1993

AMLM024 08

AMLM024 04

AMLM024 05

AMLM024 06

CSA001 9 0:01:02 1/04/1993 4
AMLM024 08

 

[johnpoole]

your switch is down i assume, i wold pull all the cards and power cycle it, then if it will load put the cards back in one at a time

john poole
bellsouth business
columbia,sc

 

[johnpoole]

all the cards except the ssc!!!!

john poole
bellsouth business
columbia,sc

 

[JoePerri]

You got a prompt when it finished sysloading. It's just displaying some error messages related to the mail. What happens when you hit enter?

Joe

 

[wolfi24]

Try this , put your MMail down and then power on your system

Wolfi

 

[chaosnla]

on an opt 11 don't login for f20 mins after the sysload as it takes mail about that long to load, if you login before mail loads the youi interup the proscess for mail to load .. check by dialing the mail number and make sure mer mail answers before loging in.

 

[johnpoole]

instructor never came back, so maybe his pc went down also???

john poole
bellsouth business
columbia,sc

 

[lrisley]

Sorry for the delay. Thank you all for your responses!
I did power cycle it (quit a few times now).
We don't actually have a mail option installed on either of the option 11's.
I don't actually ever get a prompt to start typing anything.
It has been left alone for weeks without any change to the error cycle.

 

[johnpoole]

can you get a command prompt at all? what port are you on?

john poole
bellsouth business
columbia,sc

 

[acewarlock]

system must be working as it is doing the daily routins.

when you hit the enter key do you get any responce back?



CSA001 9 0:00:32 1/04/1993 4
DROL000 TDS LD34 BEGIN 00:01 1/4/1993

DROL001 TDS LD34 END 00:01 1/4/1993

DROL000 CED LD35 BEGIN 00:01 1/4/1993

 

[johnpoole]

sounds like he has a lot of trash built that is not connected any more, take 48 out of your drol, and out the trash giving you codes that is not used, any switch will ini if the cpu is bogged down with trash

john poole
bellsouth business
columbia,sc