option 11c when open no data on putty

[elabbasy]

i have option 11c rls 5.5 when i open it with connected with tty 0 no any data
but when i put ssc card without ntsk01aee5 it bring data and light going yellow then red
can i Chang ntsk01 with nttk13aa

 

[Firebird Scrambler]

What is the item code for the SSC card?. I've known some of the later ones to go faulty. I tend to try and use the older NTDK20JA cards. From TTY 0, you should be seeing some boot up screen information. Also make sure that the very top dip switch (150 baud) is ALSO set over to the right as this will give out extra test information when the SSC card is booted up.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.