Option 11c Remote connection disconnect

[hadacon]

Hi

Option 11C is equipped with US robotics 56 K message modem.
My PC operating system is Windows XP SP 2. Connection is not established with Option 11 When I use external US robotics 56 K message modem. But connection is established When I use US robotics SportsterVoice 33.6 FaxModem and
I can view and make changes without any problem.
Looking for help


With Best regards,
Hadacon

 

[TAnselm]

I find that with option 11's they are real touchy on the speed of the modem. You can't let procomm do auto baud-baud rate. You usually have to specify the exact baud rate the the option 11 is using for the port you are connecting to.

 

[johnpoole]

search here for the setup proc on that 56.. they work, we use them but the as posted they are not plug and play.. i did the search

1. There are (8) dip switches on the rear of the modem. Set switches S1, S3, S7, & S8 in the down position, the rest in the up position.

2. Connect the modem to a terminal or personal computer using a 25 pin RS232 cable.

3. Set the terminal or personal computer serial port to 9,600 baud (8 data bits / no parity / 1 stop bit ).

4. Turn the power ON to the modem.

5. Using the terminal or the terminal portion of the personal computer communications package, issue the following AT command. AT&B1&W&W1

6. Turn the power OFF to the modem, and disconnect it from the terminal or personal computer.

7. Set the (8) dip switches on the rear of the modem as follows. Set switches S1, & S4 in the down
position the rest in the up position.

8. Connect the modem to the Meridian 1 system as instructed in the NTPs

john poole
bellsouth business
columbia,sc