Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OPTION 11C keys actiation

Status
Not open for further replies.

ATMFIRE

Technical User
Aug 3, 2024
2
MX
hi, we have an issue when sometimes need to use the # digit in our phones but after pressing 9 it end the call. that is the only key we have troubles. someone knows if the comman LD 20 is usefull for this? or some other command
 
Just so I understand your question,

You mean that you dial "9" for an outside line and then you press "#" and the call gets disconnected?.

The hash "#" key was sometimes used in speed dial numbers to tell the system that no more digits would be sent during the dialling out stage. It would work once the call was connected to e.g an answering machine etc.

Are you doing this from an analogue phone?.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
I just need it to work as the # key, for example, to activate voicemeail from telephone company you have to dial #86, but when we use it in the office phones (of the option 11C) it just Finnish the call. Idk if there is some commands to use the # key as normal # key instead of doing another function
 
Have you looked in LD 56 and printed off the FTC codes?

It might be that #86 is assigned as a feature code.

Are the Office phones the type with a display and have a few feature buttons?.

There should be a model number such as e.g M2008 or M3904 etc.

Can anybody access the Voicemail system?.


Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top