Feb 6, 2009 #1 WaltNC IS-IT--Management Jan 25, 2007 94 US On a Meridian 1 in Load 16 when programming the route data block for a PRI ,for prompt DSEL what determines if VOD or 3VCE is used as a response?
On a Meridian 1 in Load 16 when programming the route data block for a PRI ,for prompt DSEL what determines if VOD or 3VCE is used as a response?
Feb 6, 2009 #2 GHTROUT IS-IT--Management Nov 25, 2005 7,915 US 3VCE is the right choice, but I'll have to defer "why" to someone else This is what I've heard: If you only run VCE, some fax calls will not go through. So use 3VCE VOD sends some extra info that has always caused problems for me. ~~~ [small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small] Upvote 0 Downvote
3VCE is the right choice, but I'll have to defer "why" to someone else This is what I've heard: If you only run VCE, some fax calls will not go through. So use 3VCE VOD sends some extra info that has always caused problems for me. ~~~ [small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
Feb 6, 2009 #3 telebub Vendor Jan 9, 2009 1,557 US I agree. 3VCE is what I always use for PRI and I don't know "why" either. War Eagle!! Upvote 0 Downvote
Feb 6, 2009 Thread starter #4 WaltNC IS-IT--Management Jan 25, 2007 94 US Thank you both for your responses. Upvote 0 Downvote