Hi,
I have an old option 11 serving polling purposes only:
REQ ISSP
VERSION 1411
RELEASE 20
ISSUE 19 +
IN-SERVICE PATCHES : 2
PAT# PRS AUTH ID NAME DATE
001 BV31450 00 0000 LD49IDC 04 /01
002 BV40641 00 0000 MMAIL 04 /01
There are 5 PRI cards (cards 3-7) supporting T1 service
PRI* TRK LOOP 3 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - LCKO ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - BUSY ISA
CH 19 - BUSY ISA CH 20 - LCKO ISA
CH 21 - LCKO ISA CH 22 - LCKO ISA
CH 23 - LCKO ISA CH 24 - DCH 13
PRI* TRK LOOP 4 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - IDLE ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - IDLE ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - IDLE ISA CH 24 - DCH 14
PRI* TRK LOOP 5 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - IDLE ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - IDLE ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - IDLE ISA CH 24 - BKUP DCH 15
PRI* TRK LOOP 6 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
PRI* TRK LOOP 7 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
Cards 6 & 7 I have disabled as indicated by our telco when the cards tried to connect to the CO - as we have more than enough capacity with the remaining 3.
Card 3-5 are running, but almost every other day a few channels switch into LCKO status - on card 3 and/or 5.
I am able to DSCH and ENCH the channels to bring them back to IDLE status.
Anyone have any ideas why this might be happeneing.
Cards 3 supports dialing out by 9. (Hence 1 DCH here)
Cards 4 & 5 supports dialing out by 8 (Hence two DCHs here)
Alternatively, anyone have any ideas on what we could use to replace this Option 11. Effectively, we need to be able to connect our T1's to a unit that will provide 60 analog modem lines. We tested out a Cisco 5300 unit, but the analog ports created toO many polling errors and prolonged polling activities by 5 times.
All suggestions welcomed.
Thanks
I have an old option 11 serving polling purposes only:
REQ ISSP
VERSION 1411
RELEASE 20
ISSUE 19 +
IN-SERVICE PATCHES : 2
PAT# PRS AUTH ID NAME DATE
001 BV31450 00 0000 LD49IDC 04 /01
002 BV40641 00 0000 MMAIL 04 /01
There are 5 PRI cards (cards 3-7) supporting T1 service
PRI* TRK LOOP 3 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - LCKO ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - BUSY ISA
CH 19 - BUSY ISA CH 20 - LCKO ISA
CH 21 - LCKO ISA CH 22 - LCKO ISA
CH 23 - LCKO ISA CH 24 - DCH 13
PRI* TRK LOOP 4 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - IDLE ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - IDLE ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - IDLE ISA CH 24 - DCH 14
PRI* TRK LOOP 5 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - IDLE ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - IDLE ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - IDLE ISA CH 24 - BKUP DCH 15
PRI* TRK LOOP 6 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
PRI* TRK LOOP 7 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
Cards 6 & 7 I have disabled as indicated by our telco when the cards tried to connect to the CO - as we have more than enough capacity with the remaining 3.
Card 3-5 are running, but almost every other day a few channels switch into LCKO status - on card 3 and/or 5.
I am able to DSCH and ENCH the channels to bring them back to IDLE status.
Anyone have any ideas why this might be happeneing.
Cards 3 supports dialing out by 9. (Hence 1 DCH here)
Cards 4 & 5 supports dialing out by 8 (Hence two DCHs here)
Alternatively, anyone have any ideas on what we could use to replace this Option 11. Effectively, we need to be able to connect our T1's to a unit that will provide 60 analog modem lines. We tested out a Cisco 5300 unit, but the analog ports created toO many polling errors and prolonged polling activities by 5 times.
All suggestions welcomed.
Thanks