Opt61C Rel-4 Issue-50 New 800# route to specific group 1

[ColbearRepor]

Hi All,

This is a "101" type question however I'm in charge of several types of switches and I'm working on an older Nortel (Opt61C Rel-4 Issue-50)... been doing ok for a number of years but I sure could use a nudge in the right direction.

We're ordering a new 800# from "the cloud"; I assume the CLEC will send me ANI or DNIS but in a nutshell, can someone provide me a template of the areas of programming I need to address to accept and point the 800# and also the steps for grouping ext's to recieve the call?

Thanks for any input

 

[bigindian65]

you will give them the DNIS, if you have ld carrier, it can be non-did, if not a did number out of your range. you can put it in ld 49 IDC tables and point it from there, it can be a CDN in symposium out of ld 23, it depends on what you want to do with it.

Mato' Was'aka

 

[DocVic]

Or, you can call your local vendor and he can get this done in a snap.

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!

 

[ColbearRepor]

Thanks for the info bigindian65, I'll give that a try and get back to you. If anyone else wants to put there "3 cents" in I welcome that as well