Opt11C Interworking Numbering Plan 1

[nickshi]

Hi, we've two Opt11C interworking with ISDN PRI (BK50). I'm wornding if it's possible to setup an extension number 2001 in one system, and 2002 in another; and 2001 dails 2002 directly connect to 2002 at the other side? Thanks.

 

[johnpoole]

yes just build a rlb that sends calls to the route between the two switches, ld 86 new rlb.. then in 87 new cdp dsc 2002, when user dials 2001 the switch sends it to your tie route to the other switch, you'll need to dup this for each number in each direction...more common to use 2000 in switch a and 3000 in switch b, then just send the 3's across. you can do it with the vnr (vacant number routing) set to yes and enter route but the switching is slower

john poole
bellsouth business
columbia,sc

 

[nickshi]

Understood. Thank you very much. How about the CLID each side? is 2001 shows on Display "2002" when 2002 calls in, just like a call from 2001's local extension, say ext. 2100? Because we have a Capatirs(R) PhoneXpress (3rd party Voice Mail Solution, simulates as M2008, ACD) at one site, if the CLID is same as before, we hope it can serve 2 sites... Thanks.

 

[johnpoole]

if you have a pri between them names and dn's will travel the d

john poole
bellsouth business
columbia,sc

 

[nickshi]

thanks, i'll try.