NortelGuy1979
Programmer
I posted this to the comp.dcom.sys.nortel; thought I'd cross-post here too. Any help would be appreciated!
========
Hi All,
I have scoured these groups for info on BRI setup in the M1 for Polycom video conferencing, to no avail. I have the basics down; but I don't know the details of the programming.
We have an 81C w/ Succession R3 software; two MISP's, and 5 UILC's. I am having trouble getting a Polycom to work; I know it is good because it works on the BRI's from SBC. However, on the 81C, the Polycom will not detect SPIDS; and won't make calls if I enter the info manually, etc.
Here's my setup (one port...) Can someone tell me what I'm doing wrong? The rest of my ports are like this too.
============================================
(MISP)
LOOP 104
APPL BRIL
DPSD NO
CARD1 108 0 5
CARD2 108 0 6
CARD3 108 0 7
CARD4
(UILC)
TN 108 0 5
MISP 104
CTYP UILC
(LAPD)
PGPN 0
LAPD
T200 2
T203 20
N200 3
N201 260
K 1
N2X4 10
#DSL 40
#ROUTES 0
(DSL)
TN 108 0 5 0
DES HH
CUST 0
CTYP UILC
OPT BRIL
MISP 104
B1CT VCE DTA
B2CT VCE DTA
LDN NO
XLST 0
MTEI 8
MCAL 16
MTSP 8
LAPD 0
PRID 6
PDCA 1
FDN
EFD
HUNT
EHT
TGAR 1
NCOS 7
SCPW
SGRP 0
CLS CTD ICDD CDMD MRD ABDD PGND BRTD
DATE 8 NOV 2004
(TSP)
TYPE TSP
DSL 108 0 5 0
OPT
USID 1
MPHC NO
SPID 81640447850101
DN 44785 0
CT VCE DTA
MCAL 4
CLIP YES
PRES YES
COLP NO
TRANS NO
FEAT HTD FND SFD CFTD MWD FBD CFXD DNO3 DNDY
SSRV_NI
DFDN 44785
USID 2
MPHC NO
SPID 81640447860101
DN 44786 0
CT VCE DTA
MCAL 4
CLIP YES
PRES YES
COLP NO
TRANS NO
FEAT HTD FND SFD CFTD MWD FBD CFXD DNO3 DNDY
SSRV_NI
DFDN 44786
============================================
I've also tried, on the TSP, only having USID 1 and putting two DN's and two SPID's on that one USID. Doesn't work either. I've also tried changing protocals from NI-1 to DMS, and that doesn't work. My vendor is clueless; and Polycom says it's not their problem since the unit works on the PSTN.
Any help is MUCH appreciated! My hospital is trying to save money on ISDN from SBC; and utilize our existing trunking.
Thanks,
Matt
========
Hi All,
I have scoured these groups for info on BRI setup in the M1 for Polycom video conferencing, to no avail. I have the basics down; but I don't know the details of the programming.
We have an 81C w/ Succession R3 software; two MISP's, and 5 UILC's. I am having trouble getting a Polycom to work; I know it is good because it works on the BRI's from SBC. However, on the 81C, the Polycom will not detect SPIDS; and won't make calls if I enter the info manually, etc.
Here's my setup (one port...) Can someone tell me what I'm doing wrong? The rest of my ports are like this too.
============================================
(MISP)
LOOP 104
APPL BRIL
DPSD NO
CARD1 108 0 5
CARD2 108 0 6
CARD3 108 0 7
CARD4
(UILC)
TN 108 0 5
MISP 104
CTYP UILC
(LAPD)
PGPN 0
LAPD
T200 2
T203 20
N200 3
N201 260
K 1
N2X4 10
#DSL 40
#ROUTES 0
(DSL)
TN 108 0 5 0
DES HH
CUST 0
CTYP UILC
OPT BRIL
MISP 104
B1CT VCE DTA
B2CT VCE DTA
LDN NO
XLST 0
MTEI 8
MCAL 16
MTSP 8
LAPD 0
PRID 6
PDCA 1
FDN
EFD
HUNT
EHT
TGAR 1
NCOS 7
SCPW
SGRP 0
CLS CTD ICDD CDMD MRD ABDD PGND BRTD
DATE 8 NOV 2004
(TSP)
TYPE TSP
DSL 108 0 5 0
OPT
USID 1
MPHC NO
SPID 81640447850101
DN 44785 0
CT VCE DTA
MCAL 4
CLIP YES
PRES YES
COLP NO
TRANS NO
FEAT HTD FND SFD CFTD MWD FBD CFXD DNO3 DNDY
SSRV_NI
DFDN 44785
USID 2
MPHC NO
SPID 81640447860101
DN 44786 0
CT VCE DTA
MCAL 4
CLIP YES
PRES YES
COLP NO
TRANS NO
FEAT HTD FND SFD CFTD MWD FBD CFXD DNO3 DNDY
SSRV_NI
DFDN 44786
============================================
I've also tried, on the TSP, only having USID 1 and putting two DN's and two SPID's on that one USID. Doesn't work either. I've also tried changing protocals from NI-1 to DMS, and that doesn't work. My vendor is clueless; and Polycom says it's not their problem since the unit works on the PSTN.
Any help is MUCH appreciated! My hospital is trying to save money on ISDN from SBC; and utilize our existing trunking.
Thanks,
Matt