Opt 11 PRI

[Art Frederick]

I'm attempting to setup a PRI with a new carrier. Outbound calls work just fine but inbound calls will connect for just a split second and then drop. Below are the d-channel messages I have captured from the call. Trunks are configured as DID and PRI is set for National. Hoping someone might have some ideas.

DCH 4 UIPE_IMSG CC_SETUP_IND REF 00004011 CH 1 1 TOD 10:40:52
CALLED #:1991 NUM PLAN: E164 TON: LOCL
CALLING #:2609193060 NUM PLAN: E164 TON: NATL

DCH 4 UIPE_OMSG CC_PROCEED_REQ REF 0000C011 CH 1 1 TOD 10:40:52

DCH 4 UIPE_OMSG CC_ALERT_REQ REF 0000C011 CH 1 1 TOD 10:40:52
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 4 UIPE_IMSG CC_DISC_IND REF 00004011 CH 1 1 TOD 10:40:52
CAUSE: #16 - NORMAL CALL CLEARING

DCH 4 UIPE_OMSG CC_RELEASE_REQ REF 0000C011 CH 1 1 TOD 10:40:52

DCH 4 UIPE_IMSG CC_RELEASE_CONF REF 00004011 CH 1 1 TOD 10:40:52

 

[AvayaHE]

oh sorry ,
but CHannel Typ is not DCH

 

[AvayaHE]

Did you ever try change your Trunks do "imm"