Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Opt 11 onboard telephone firmware
- Thread starter Rusty3995
- Start date
the firmware comes with the rls.. an older rls is built to interface with the firmware version that was current at the rls date.. we are on rls 3, firmware is 87.x, we just make sure the firmeware matches the on board... newer firmware does not work right on this rls so we download all the sets.. this spring we are going to rls 5, at that time we will get the latest firmware
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
x11tech
Programmer
- Dec 26, 2007
- 190
- 0
- 0
dlesap is correct. Within every major PBX release there are one or more firmware/loadware releases for the phones.
PDT access is available to those who have received the training from Nortel or from a distributor (or who has previously worked at a distributor). The software is available either from Nortel Support or Nortel Enterprise Software Patch Library. Both require access permissions. They are intending to migrate all patches/loadware to the support portal, but until that migration is completed, the ESPL remains the primary portal for distributor access to all software patches.
If you are not a vendor with a relationship with Nortel, or a COAMs customer with a Nortel relationship, you will not get ESPL access.
In other words, you should contact your maintenance vendor to acquire the latest loadware/firmware for your M3900 sets.
Why do you want to upgrade the loadware/firmware? Are you experiencing a problem that requires this, or are you just doing preventative maintenance work?
PDT access is available to those who have received the training from Nortel or from a distributor (or who has previously worked at a distributor). The software is available either from Nortel Support or Nortel Enterprise Software Patch Library. Both require access permissions. They are intending to migrate all patches/loadware to the support portal, but until that migration is completed, the ESPL remains the primary portal for distributor access to all software patches.
If you are not a vendor with a relationship with Nortel, or a COAMs customer with a Nortel relationship, you will not get ESPL access.
In other words, you should contact your maintenance vendor to acquire the latest loadware/firmware for your M3900 sets.
Why do you want to upgrade the loadware/firmware? Are you experiencing a problem that requires this, or are you just doing preventative maintenance work?
acewarlock
Technical User
What good would it be to have a firmware Rls on your phones that your system doesn't support?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
911guru
Programmer
- Nov 10, 2007
- 437
- 0
- 0
When you load a new firware for digital sets, you actually send it to the call server where it gets compiled to the PSDL file. From there the firmware is distributed to the telephones. This is a manual or scheduled process for TDM phones, IP phones query and pull the latest firware on the TPS server. So the only way you woul dhave FW on a phone not matching the Call Server is if you never ran the FW upgrade commands in LD 97.
911Guru
911Guru
acewarlock
Technical User
He said he had an Option 11, didn't say anything about a call server.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
911guru
Programmer
- Nov 10, 2007
- 437
- 0
- 0
PBX / Call Server are the same as far as FW is concerned. Everything is a call server in 5.00 even of it's a TDM Option 11C Cabinet.
911Guru
911Guru
acewarlock
Technical User
But we don't know what Rls of Option 11 the person that asked the question has, it could be Rls 25.40b.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
911guru
Programmer
- Nov 10, 2007
- 437
- 0
- 0
OK, forgive me for using the term Call Server so generically.
Firmware is Firmware though, and if the user is on 25.40 or 24.24, or 5.00, the telephone set FW for M390x digital sets can be updated via a FW upload and recompile of the PSDL.REC and then downloaded to the 390x phones.
2000 series phones do not have FW that is down loadable.
911Guru
Firmware is Firmware though, and if the user is on 25.40 or 24.24, or 5.00, the telephone set FW for M390x digital sets can be updated via a FW upload and recompile of the PSDL.REC and then downloaded to the 390x phones.
2000 series phones do not have FW that is down loadable.
911Guru
- Status
Similar threads
- Locked
- Question
