Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OPI II transfer

Status
Not open for further replies.

b17liviu

Technical User
Jul 14, 2008
35
RO
Hi,
i need help.
the operator (OPI II) when transfer the external call(analog trk ) to the extension wich has activate personal number the call go automatic to the extension. OPI II is set N(Neutral) and mannual extending ,i have set M (manual) but works the same.



OPISP:DIR=26015; OPERATOR INSTRUMENT STATUS DATA
DIR ANSW EXTEND AUD LEV MODE LANG
26015 N N N L 1 -

END

<PELPP:DIR=26002;PERSONAL NUMBER LISTS INFORMATION

PERSONAL NUMBER:26002
LIST CHO ANSPOS TIME BSYCHO ONECAL ORGSEL SMSSEL
1 1 26002 13 - 1 111 0
1 2 26012 50 - 1 111 0


END

<CADAP;CALENDAR DATA
IDENTITY=
VERSION=CXP1010110/2/BC12SP10/R7A
11:25:48
THU 28 MAY 2009
END

<OPCAP:DIR=26015; OPERATOR CATEGORY DATA
DIR OPC PRG TRAF TRM
26015 10000 1 1515 0

END
 
i have this problem on one extension only. the problem started when i set 'divert whit pelpi' for this extension
can anyone help me
 

I had this at BC11 years ago and was told by Sweden that because the number is sent en bloc, a PELPI will activate immediately as you say, and this is not a fault.

best parnum
 
interesting,today i checked (tested)again it works ok ,the problem seems to disipier ,is this posibile ?
thanks a lot.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top