OPI II transfer

[b17liviu]

Hi,
i need help.
the operator (OPI II) when transfer the external call(analog trk ) to the extension wich has activate personal number the call go automatic to the extension. OPI II is set N(Neutral) and mannual extending ,i have set M (manual) but works the same.



OPISPIR=26015; OPERATOR INSTRUMENT STATUS DATA
DIR ANSW EXTEND AUD LEV MODE LANG
26015 N N N L 1 -

END

<PELPPIR=26002;PERSONAL NUMBER LISTS INFORMATION

PERSONAL NUMBER:26002
LIST CHO ANSPOS TIME BSYCHO ONECAL ORGSEL SMSSEL
1 1 26002 13 - 1 111 0
1 2 26012 50 - 1 111 0


END

<CADAP;CALENDAR DATA
IDENTITY=
VERSION=CXP1010110/2/BC12SP10/R7A
11:25:48
THU 28 MAY 2009
END

<OPCAPIR=26015; OPERATOR CATEGORY DATA
DIR OPC PRG TRAF TRM
26015 10000 1 1515 0

END

 

[b17liviu]

i have this problem on one extension only. the problem started when i set 'divert whit pelpi' for this extension
can anyone help me

 

[parnum]

I had this at BC11 years ago and was told by Sweden that because the number is sent en bloc, a PELPI will activate immediately as you say, and this is not a fault.

best parnum

 

[b17liviu]

interesting,today i checked (tested)again it works ok ,the problem seems to disipier ,is this posibile ?
thanks a lot.