Operator Night Answer Point

[cowboz]

Hey, First of all I am brand new to the Ericsson world (2weeks) so pleas be patient. I will probably be on here allot. So my ? right now is for the RODNI for the operator is it safe to assume the Night Parameter should be the Voice mail assigned to the system in this case a call express? Trying to figure out why my Operator stats shows night but if you call the extension you get RNA. Any help would be appreciated.

 

[parnum]

RODNI is for external calls, OPADC is for internal only (unless no RODNI assigned where OPADC is also external). Are you calling Operator extension or Common Operator Number? Internal or External?

hope this helps

best parnum

 

[pimpsta]

DOES ANYONE make a IP ROUTING communication between MX1 SP03 and BUSINESS PHONE PER CISCO ROUTERS

 

[parnum]

which has nothing to do with the question!

 

[cowboz]

Thanks,
Actually internally, maybe this will clear it up. If I put Operator in Night mode Manually and call 0 or the ext, I get operator/out of service in the display. However if I let the system use the day/night time and call the same I get ring no ans. The system shows status as night but i get ring no ans. trying to get the same operator out of service using the day/night schedule. Sorry if that makes no sense. but thnaks for the first reply

 

[mundus]

Do you use the OPDNC command ?

 

[cowboz]

I haven't that I know of like i said kinda of got thrown into this last second.

 

[parnum]

please post and we may be able to help

RODNI:ROU=ALL,TRU=ALL;
OPCTP:CORG=ALL;
OPCGP:CORG=ALL;
OPDDPIR=ALL;
NADAP:NUMTYP=OC;
RONDP:ROU=ALL;
VMPOP;
CADAP;

best parnum

 

[cowboz]

Thanks parnum for the help here is what i got:

<OPCTP:CORG=ALL;
OPERATOR CALL TYPE DATA
CORG CALT ROU OACC CUST NDIR RERNUM CEN CCOP TIME
2 1 - 0 - N - N N -
2 2 - 0 - N - N N -
2 3 - 0 - N - N N -

END
<OPCGP:CORG=ALL;
OPERATOR CALL ORIGIN GROUP DATA
DIR
7
0
0
CORG -
2 0

<OPDDPIR=ALL;
OPERATOR DIRECTORY DATA
DIR EQU OCUST TYPE PCM REV
700 001-0-30-00 - 3 - -
<RONDP:ROU=ALL;
ROUTE NUMBER DATA
ROU PRE ROUDIR EXNOPU EXNOPR TERAC
1 648 2-503
21 2-503
41 2-503
42 2-503
<VMPOP;
VOICE MAIL PORT DATA
DIR PORT IFCIND
637 01 0
638 02 0
639 03 0
640 04 0
641 05 0
642 06 0
643 07 0
644 08 0
VOICE MAIL GROUP DATA
GRP IFCIND
664 0
END
<CADAP;
CALENDAR DATA
IDENTITY=COUNTRY-COMP
VERSION=CXP1010030/4/BC11SP10/R2A
07:44:18
WED 21 NOV 2007
END
<RODAP:ROU=ALL;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 SL63 H'00000100 H'00000003 H'000000D0 NO
21 SL63 H'00000100 H'00000005 H'000000C0 NO
41 SL63 H'00000100 H'00000005 H'000000C0 NO
42 SL63 H'00000100 H'00000005 H'000000C0 NO

END
<OPDNP;

DAY OF WEEK: WED
CURRENT STATUS: NIGHT
DAY NIGHT
MON 08:00 16:30
TUE 08:00 16:30
WED 08:00 16:30
THU 08:00 16:30
FRI 08:00 16:30
SAT ALL
SUN ALL

END

Any help would be appreciated.

Have a good holiday

 

[parnum]

this is wrong

OPCGP:CORG=ALL;
OPERATOR CALL ORIGIN GROUP DATA
DIR
7
0
0
CORG -
2 0

do
OPCTS:CORG=2,DIR=700;
OPADC:CORG=2,RERNUM=664,NDIR=Y;

also should say RODNP:ROU=ALL,TRU=ALL; (not RODNI) needed if still problems

best parnum

 

[parnum]

SORRY try OPCGS:CORG=2,DIR=700; !! long day!

 

[mundus]

parnum" long day - it must have been !!!
OPCGS:CORG=2,DIR=700,cho=1;

 

[parnum]

long day indeed, and another one today, thanks mundus i was going from memory

best parnum