Openstage 40 SIP - VPN

[unupeaici]

Dear all,

I have the current scenario. I'm using an Openstage 40 SIP to connect to a corporate PBX through a VPN using a router. Is there a SIP image of the phone which provides the phone with VPN capabilities? I want to exclude the router from the scenario, so I want to be able to set the server/user/pass on the phone in order to have it connected to VPN. It is not possible to use port forwarding at the destination network.

Many thanks

 

[LoPath]

No, there is only one SIP image for the phone. VPN is not supported even with the new OpenScape Desk Phone CP series. IMHO, your options would be: 1) stick with a router; or 2) get a Session Border Controller and run them over the public internet.

LoPath
Maintain HiPath 4000 V5 & V6, OpenScape Xpert V4, OpenScape Xpressions, OpenScape Contact Center V8, OpenScape Voice V9

 

[hamncheese]

I use OSPE on my laptop. After I tunnel into VPN I activate the softphone.