Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Openstae 40 SIP cyrillic 1

Status
Not open for further replies.

Sar2021

Technical User
Sep 2, 2021
11
MN
Hi all
Could you please tell me, Which version of software Openstage40 Sip support Russians Cyrillic
 
Hi
Our IP phones are connected to Openscape4000 V.8 and modules are stmix, stmi4, stmi2. Mainly configured on STMIX.
 
What type of problems do you have with displaying
the Cyrillic alphabet?
As a rule, Cyrillic support is embedded
in the board's loadware.
Are there such problems on OS40SIP
that are connected to STMI2?
 
Thanks for replying, on system using "HOT-Non Latin Display" added PERSI-name on subscriber number by Russian Cyrillic. Openstage 40 SIP phone didn't recognize Cyrillic name. Upgraded twice phone sw, but nothing changed
 
Which firmware version is installed on OS 40?
I program names using Comwin. In the settings of Comwin
there is an option to support the Cyrillic alphabet.
 
First firmware was OS40 V3.r3.9.0 then upgraded to V3.R4.10.4.
About Comwin, now used Comwin Version 5.0.138.0
and module is STMIX, (Q2343-x)
 
I have no problem with the OS20SIP version
V2R2.41.0 is connected to STMI2 and it has been working for more
than 12 years on HP4K V7
 
I have no problem with the OS20SIP version
V2R2.41.0 is connected to STMI2 and it has been working for more
than 12 years on HP4K V7
hi
thank you for your reply
What is your loadware of STMI2 board?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top