OpenScape SL5 Did Not Display the Calling Number 1

[luvarne]

Our system is HiPath 4000 V5. And we are using SL3 cordless phones. They're all working fine.

A new batch of units arrived --OpenScape SL5. Vendor told us that this is the new batch of cordless phone, supposedly better than SL3 --which will soon "phase out".

After programming we tested the unit. The incoming calls did not reflect the calling number. It's just blank or a "BASE" on top of the display screen.

Need help please, on how to display the calling number.

The missed calls also did not display when you press the INT key.

 

[thepfy]

I have many Openstage Sl5 (L30250-F600-C450) where the caller name and extn appear on the display on Hipath 4000 V5.
They are all registered as
Device Combination: mobil komf (convenience mobile telephone)
Device Family: RADIO (mobile telephone)

This is how we configure all our SL2/SL3/SL4 Pro and SL5 handsets.
We are using BS4 basestations on SLC24

I am wondering if you are configuring them as mobil gap which won't show the name and extn.

---------------------------- USER DATA ----------------------------------------
STNO =XXXXX OPT =CMI COS1 =6 DPLN =0
MAINO =XXXXX CONN = COS2 =6 ITR =0
PEN =1- 2- 1-124 LCOSV1 =4 COSX =0
INS =Y ASYNCT =500 LCOSV2 =4
SSTNO =N PERMACT = LCOSD1 =4 CBKBMAX =5
TRACE =N EXTBUS = LCOSD2 =4 RCBKB =N
ALARMNO = DFSVCANA= SPDI =10 RCBKNA =N
HMUSIC =0 FLASH = SPDC1 =0 CBKNAMB =
PMIDX =0 SPDC2 =1
SECR = DIGNODIS=N DSSTNA =N COMGRP =
STD =12 CALLOG = DSSTNB =Y TEXTSEL =ENGLISH

REP =0 OPTICOM = OPTIUSB : VPI =
IDCR = OPTICA = OPTIS0A :0 VCI =
APPM = OPTIDA = OPTISPA :0 PATTERN =
OPTIUP0E: OPTIABA :

DCFWBUSY= HEADSET = APMOBUSR= APICLASS=
DNIDSP =N HSKEY = IPCODEC = SECAPPL =
DTMFBLK = IPPASSW =
DTMFCTRD= BASICSVC=
DVCFIG =RADIO TSI =1 SPROT = SOPTIDX =
DPROT = DOPTIDX =
FPROT = FOPTIDX =
------------------- ACTIVATION IDENTIFIERS FOR FEATURES ----------------------
HTOS :N DND :N
HTOD :N VCP :Y TWLOGIN :
HTOF :N CWT :N
------------------- FEATURES AND GROUP MEMBERSHIPS ---------------------------
PUGR : ESSTN :
KEYSYS :N NOPTNO :
SRCGRP : 1 TCLASS : 0
HUNT CD :N
------------------- SUBSCRIBER ATTRIBUTES (AMO SDAT) -------------------------

+------+-----------------+---------------+-----------------+
| COS | VOICE | FAX | DTE |
+------+-----------------+---------------+-----------------+
| 6 |>6:CMI VERSION 2.3 CORDLESS-EXTNS |
| | TA | NOCO | NOCO |
| | TNOTCR | NOTIE | NOTIE |
| | CDRS | | |
| | CDRC | | |
| | CDRINT | | |
| | MB | | |
| | CFNR | | |
| | VCE | | |
| | SPKR | | |
| | FWDNWK | | |
| | CFB | | |
+------+-----------------+---------------+-----------------+

 

[Andy_tel]

The SL5 will only regsiter as DECT GAP Handset at older Hicom / Hipath sytsems ! You need special Firmware in Handset to use the comfort features !

see also

The OpenScape DECT Phone SL5 handset can be connected to the following systems:

HiPath 4000

HiPath Cordless Enterprise from R4.3.0 - CV428

OpenScape 4000

OpenScape Cordless Enterprise from R1.3.0 - CV028

HiPath 3000

HiPath Cordless Office from V9_R2.8.1_006

OpenScape Business

HiPath Cordless Office from V1 R3.4.1566