Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OpenScape 4000 Ver-8 we have got d

Status
Not open for further replies.

AbdulRashid

Technical User
Mar 10, 2012
36
PK
OpenScape 4000 Ver-8
we have got duplex eco-server and date of both eco-server are out.
i have connected key board and monitor to eco-sever to change time but our colleuge has forgotten linux password.
i cant login. IS THERE ANY WAY TO LOGIN eco-server.

i tried
EXEC-DATE:2023,,,,,,,,,NOSYNC;
H500: AMO DATE STARTED
F04: COMMAND IS ONLY ALLOWED IN TEST LABS.
 
The date and time come from NTP - Network Time Protocol
Logon to assistant via Atlantic LAN - You will see if NTP is syncronized or not.
(The time and date (clock) comes from the network)
 
If you know the password on the assistant,
for example, you can use it for the eco-server login.

And the answer to the question
! ! ! Be careful when executing commands CHANGE-DBC

CHANGE-DBC:LOCATION=TESTLAB;

EXEC-DATE:YEAR=2023,MONTH=05,DAY=02,HOUR=11,MINUTE=45,SECOND=15,SYNC=NOSYNC;

CHANGE-DBC:LOCATION=CUSTOMER;

If you do not get the password to the eco-server for a long time, then
CHANGE-DBC:LOCATION=CUSTOMER;
you can not do.
 
Mr.Masviss
Tahank you , now time is ok. when i check through comwin (dis-date;)
but when i check in eco-server-A and eco-server-b through Portal. time of both eco-server are out.
that is why i got this message in Assistant.

System number L31918Q3774A
Flex and TDM licenses 590 / ---
SLES update protection 4 / ---
Update protection validity ---
Advanced Locking ID (ecoserver-cor-B) 7ZQMWD:W9P9FXDN3*RVFNHA
Advanced Locking ID (ecoserver-cor-A) 7ZQMWEZRXCJS*WC3*RVFNHF
Grace period 2 days

Screenshot_24_dwemwp.png


kindly look in image time of both eco-server are out.
see above the grace period (just 2 days left)
we have installde licensec arroud five years ago.

please help us.
 
Until you set the current date on eco-servers, you will have license issues. Simple service engineers cannot help here. You need to get access to eco-servers (you may need a complete re-installation of the software). It is better to contact the Unify representative office.
Perhaps if you find a Linux specialist, he will be able to help with the password on Suse Linux. I am a simple Linux user.
 
The date and time come from NTP - Network Time Protocol
 
When the 4K was installed it should have been configured with an NTP server address in the XML. If it wasn't, then it wasn't installed correctly. So the 4K should be sending requests to an NTP server. If you configure a monitor session on the data switch against the 4Ks customer LAN port, filter on port 123, you will see where the 4K is trying to get time from. Putting an acceptable NTP source on that address would solve your time issue.

You could also shutdown a node, boot into BIOS if you can, and set the hwclock correctly (should be UTC time and configured time zone takes care of the adjustment).

If you don't want to start messing around with linux partitions to solve your password problem you could make a RISO image (appliance management), remove the hashed root password in the /config XML, and reinstall the system so that the password sets to default. Ive not tried that from a RISO but I don't see why it wouldn't work.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top