Opening Port - Urgent

[Haroust]

I recently upgraded my SBS 4.5 server with proxy 2 to SBS 2000 who runs ISA server.
Since the upgrade I cannot connect to one of my suppliers server. My suppliers tells me that I have to have port 2010 open on my firewall.
I can go online with my server or my workstations,
I can connect to my suppliers server from my server,but I cannot connect from my workstations, could somebody help me with this problem, the help would be very appreciate.

 

[HeathRamos]

Well...not sure about the question but I will take a stab at it.

You would either have to create a protocol rule referencing a protocol definition you create using that port and then having workstations use ISA as default gateway or...

if this is just a custom SSL port that is needed, there is a vbs script I believe you can run to add non standard ports.

 

[dput]

Here is an example of the vbs file if you need it:

set isa=CreateObject("FPC.Root")
set _
tprange=isa.Arrays.GetContainingArray.ArrayPolicy.WebProxy.TunnelPortRanges
set tmp=tprange.AddRange("SSL 21455", 21450, 21459)
set tmp=tprange.AddRange("SSL 21", 21, 21)
tprange.Save


Dan

 

[Haroust]

I did create a protocol rule in protocol definitions and then
under Access Policy - Protocol Rules a new protocol rule and everthing seems to work fine ,thank you HeathRamos