I am new to cisco, so please be kind to my stupid question. I am trying to access my main office from behind a PIX 501. The main office has a PIX 515 and VPN is working fine for all Cisco vpn clients (version 3.51), except from behind the 501. Both PIX's are running 6.33, and I have nat-t enabled on the 515 at the main office. I have been able to establish a connection with the vpn to the main office, but not able to access any resources, can't map drives or use terminal services, etc...
I have looked through alot of these postings and have come up with, I need to open ports for udp 500 and upd 4500 on the 501 PIX. My question is how do I do this, and on what interface, outside interface for in? inside interface out? I am clueless... any guidance would be a great help.
I have looked through alot of these postings and have come up with, I need to open ports for udp 500 and upd 4500 on the 501 PIX. My question is how do I do this, and on what interface, outside interface for in? inside interface out? I am clueless... any guidance would be a great help.