Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Openescape x8 with Openescape cp400t
- Thread starter msg_lotfy
- Start date
If this is OpenScape 4000 ?
Call Log = CHANGE-SBCSU:STNO=XXXX,OPT=OPTI,CALLOG=??
Set the TAPRO (KeyMap) for the phone to correctly use redial keys.
Make sure no phone is using TAPRO 40
DIS-TAPRO:STN,,40;
If no phone is using TAPRO 40 then set it to be CP400
CHA-TAPRO:,40,CP400;
Move the Phone into TAPRO 40
CHA-TAPRO:XXXX,40;
Then check the keys
Call Log = CHANGE-SBCSU:STNO=XXXX,OPT=OPTI,CALLOG=??
Set the TAPRO (KeyMap) for the phone to correctly use redial keys.
Make sure no phone is using TAPRO 40
DIS-TAPRO:STN,,40;
If no phone is using TAPRO 40 then set it to be CP400
CHA-TAPRO:,40,CP400;
Move the Phone into TAPRO 40
CHA-TAPRO:XXXX,40;
Then check the keys
Last edited:
No, it's an OpenScape Business (X8).
Similar threads
