Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Openboot 3.1 ... power-off only?

Status
Not open for further replies.

frumpel

Technical User
Sep 10, 2007
2
CA
Hi All!

I have a Sun Ultra 60. It was working fine for me until I tried upgrading memory. Now (after I put it all together the way it was) it dumps me at the ok prompt (both keyboard/screen and serial console mode):

{0} ok

and I can type ONE command. The only command that I have found to work is power-off. All other commands just hang. Any ideas what the problem might be?

Thanks,

Rudolf
 
Oops, my bad ... took it all apart again, found some dust in processor slots and cleaned it out, not the box is working fine ...

Rudolf
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top