Openboot 3.1 ... power-off only?

[frumpel]

Hi All!

I have a Sun Ultra 60. It was working fine for me until I tried upgrading memory. Now (after I put it all together the way it was) it dumps me at the ok prompt (both keyboard/screen and serial console mode):

{0} ok

and I can type ONE command. The only command that I have found to work is power-off. All other commands just hang. Any ideas what the problem might be?

Thanks,

Rudolf

 

[frumpel]

Oops, my bad ... took it all apart again, found some dust in processor slots and cleaned it out, not the box is working fine ...

Rudolf