Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Open the door with an ATA-2

Status
Not open for further replies.

BingBang99

Programmer
Oct 12, 2006
54
CA
I want to open a door linked with a DOOR OPENING CONTROLER, with a wireless phone connected on an ata-2, by pressing digit 6.

Is it possible
 
you need to have the door contoller call the cordless phone. Then press 6.
 
I tried and it don't work. With the norstar phones it work but not with the analogue.
 
try it with a vmi if you got one laying around. ATA-2 have some problems passing DTMF under certain circumstances.

------------------------------------------
Wash, rinse, repeat.
 
You can try to check and see if your analog ext. is programmed to receive tones. I had to chg same thing to open third party door opener.
 
VMI was for hooking up third party voicemail systems to Norstar systems. They are analog extensions that allow pass thru of DTMF tones.

------------------------------------------
Wash, rinse, repeat.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top