Open Scape Voice 8000 V7

[albus75]

Hi everybody ,
dose any one knows how to find out how many sip trunk license I've got on open scape voice 8000 v7 ? actually I found out only the dynamic license , but i suppose that are only for users .

Thanks in advanced to all of you .

Regards
Albus

 

[donb01]

Someone will correct me if I'm wrong, but I believe the new Comscendo license is that "a port is a port". If you have 1000 ports they could be 1000 of one thing or 1000 of many things. It is possible there are settings in DIMSU that might limit how many can be set up, but those numbers can be adjusted slightly if needed. I saw numbers for PRI, TRK, and CRCP - I don't know if SIP trunks fall into one of those or something else.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[albus75]

Thanks a lot Don for your quick response , another question if is possible , I have 60 channels sip trunk from H4 v7 towards osv 8k , what i need to do is making a trunk sip from 8K versus Alcatel , in this case , do i have to add channels on 8k ?
Thanks a lot .
Albus

 

[donb01]

I don't know SIP so I can't give you an accurate answer, but in my mind you would have to have SIP channels/trunks on both sides, with an appropriate matching protocol between the two, and on each side you would need to have your trunk groups and routing set up to route your chosen traffic across the connection. How the rest of the SIP config plays into that I don't know - I can just barely configure a polycom conference phone to work on my system without referring back to a cheat sheet from the last time!

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[sbcsu]

As far as I know without reference, The trunks on the V7 (SIP, ISDN, Analog etc.) - the channels are counted and removed from the licenses.
In V8 trunks are not counted from the license.