Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Open scape Business X8

Hichamis88

Technical User
Sep 29, 2023
18
DZ
What equipment is compatible with: (Open scape Business X8)
and with this features:
- 04 ports for analog network lines
- 18 ports for analog subscriber lines
- 06 ports for digital subscriber lines
- 15 expandable IP lines + IP User license
- Interconnection activation
- License + IP Desktop Softphone .
 
You want to know which cards and licenses you need in a X8 for your configuration?
 
You want to know which cards and licenses you need in a X8 for your configuration?
I don't have enough knowledge about this system.
I will explain to you :
There is a secondary company and I want to link it to the main company that has the x8 device
What is the device that can connect to the X8 and has the following characteristics

[ 04 ports for analog network lines
- 18 ports for analog subscriber lines
- 06 ports for digital subscriber lines
- 15 expandable IP lines + IP User license
- Interconnection activation
- License + IP Desktop Softphone .]

Any device, for example, X3 or a device from Avaya, NEC, Panasonic or Alcatel?
 
A X3 could do, for a wall mounted system that will be:
X3W System Box
X3W/ X5W Basic Mainboard OCCMB
M.2 SATA SSD
with system software
An for your country fitted extension cord.

On the motherboard are 8 digital and four analogue subsciber lines.
Expand the system with:
One SLAV16 card, that together with 4 ports on the motherboard, you'll have 20 analogue subscriber lines.
And a TLANI4 card for four analogue network lines.
I would recommend a OCCBL to add 40 more DSP channels (above the 8).

If you want a rack mounted system (19 inch cabin), you need:
X3R System Box (instead of the X3W System Box)
X3R/ X5R Basic Mainboard OCCMBR (instead of the OCCMB board)
SLAV16R with six RJ45-RJ45 Adapter Cables (instead of the SLAV16)
TLANI4R (instead of the TLANI4)

Licenses:
You'll need a Base licence and (18+6) 24 TDM User licences.

An OpenScape Business system can be equiped with SIP trunks (network lines) and IP extensions (subscribers).
If you mean with "15 expandable IP lines" network/trunk lines then you need 15 S2M/SIP/T1 Trunk licences (F31505-K158-D3).
If you mean subscriber lines (extensions) you'll need 15 IP User licences.
For the IP Deskphone softphone you can use any SIP client or myPortal@work software which is shipped with the system.
For every client you'll need an IP User licence too.
To connect the X3 to the X8 you need a Network licence on both systems.

Also check out the wiki: https://wiki.unify.com/wiki/OpenScape_Business#Hardware_Platforms

Í probably forget something, let yourself inform by your supplier.
 
Last edited:
A X3 could do, for a wall mounted system that will be:
X3W System Box
X3W/ X5W Basic Mainboard OCCMB
M.2 SATA SSD
with system software
An for your country fitted extension cord.

On the motherboard are 8 digital and four analogue subsciber lines.
Expand the system with:
One SLAV16 card, that together with 4 ports on the motherboard, you'll have 20 analogue subscriber lines.
And a TLANI4 card for four analogue network lines.
I would recommend a OCCBL to add 40 more DSP channels (above the 8).

If you want a rack mounted system (19 inch cabin), you need:
X3R System Box (instead of the X3W System Box)
X3R/ X5R Basic Mainboard OCCMBR (instead of the OCCMB board)
SLAV16R with six RJ45-RJ45 Adapter Cables (instead of the SLAV16)
TLANI4R (instead of the TLANI4)

Licenses:
You'll need a Base licence and (18+6) 24 TDM User licences.

An OpenScape Business system can be equiped with SIP trunks (network lines) and IP extensions (subscribers).
If you mean with "15 expandable IP lines" network/trunk lines then you need 15 S2M/SIP/T1 Trunk licences (F31505-K158-D3).
If you mean subscriber lines (extensions) you'll need 15 IP User licences.
For the IP Deskphone softphone you can use any SIP client or myPortal@work software which is shipped with the system.
For every client you'll need an IP User licence too.
To connect the X3 to the X8 you need a Network licence on both systems.

Also check out the wiki: https://wiki.unify.com/wiki/OpenScape_Business#Hardware_Platforms

Í probably forget something, let yourself inform by your supplier.
thx bro
 

Part and Inventory Search

Sponsor

Back
Top