One-X Mobile Setup

[beauuu]

Hi, I was trying to connect my mobile phone to our IPO500v2. I'm not sure what I need to change to be able to connect.. I've set myself up as a Power User and enabled the One-x Portal option.. I've also enabled One-x Telecommuter and Remote Worker to see if those were related somehow. Under mobility for my user, I've enabled the One-X Mobile Client as well.

What else am I missing? I'm able to login to the One-X portal and have been able to use the softphone on my PC as well without problems. I guess I should note that we are using the UCM for this.. if that makes any difference.

Thanks!

 

[TexasBear]

Is your phone connected to the same network as the PC you use to login to One-X? Wifi, etc?

 

[tlpeter]

You really should start reading the One-X Portal implementation documents.
You need to setup a FQDN and program it in the One-X Portal server.
You need to forward some ports and configure the IPO so that mobile twinning works.


BAZINGA!

I'm not insane, my mother had me tested!