Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

one-x mobile can't send & recive sound 2

Status
Not open for further replies.

soshianet

Technical User
Jul 10, 2013
3
CA
i have a problem with one-x mobile for local access without have line pstn & Pri or Bri line just for internal
i have a problem with one-x mobile for local access when installed this xmpp on server and then installed one-x version for mobile.
can just send and recive im but at time call can't hear voice and can't send your voice from extention mobile one-x and hard phone only have ring after this you cant hear and send voice.
have this important setting in ipo or server one-x or in one-x mobile version ?? have any one here that worked it ??
 
I don't have any hands-on experience with 1X yet, but in contrast with IPO (same issue) it is related with the network group or IP ranges, please confirm if your server and extn units are in 1 same network (IP range).
 
One-X Mobile is not a softphone client. It requires trunks on the phone system side to call you and connect you to the party you are talking to. Without trunks, there will be no speech path. R9 will introduce a softphone portion to this, but it's not working yet. If you want internal calls between one-x mobile and extensions, you'll need a sip softphone and end point licenses.

I'm not even sure how you are getting ringing, unless it is just on the hardphone side. The data connection is initializing the call over the wifi/3g/4g on the system, but it is not going to call you and connect that call.

-Austin
ACE: Implement IP Office
qrcode.png
 
I should clarify, that it is not a softphone yet on IP Office, it is on CM (uses SIP), or so I've read.

-Austin
ACE: Implement IP Office
qrcode.png
 
i know One-X Mobile is not a softphone client and i want know about trunking for that
but i read that for twining mobile if you have lic power user ,,can do it easily...
i connected it to wifi and added bridge number for it in one-x portal client and and i know if isn't possible for sip soft phone i should buy lic 3rdparty
and if it is true (one-x mobile can't connected easily & don't have mobility feature ) this have contradiction with adv in avaya for lic power user
so why in one-x mobile have call and conferance button and how to help for decrease cost in local
and how i can add trunk special for it
plz help me..if is possible for you :(
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top