Johnny du Toit
Systems Engineer
i have a installed a new SV9300 at a client, the system works well for the first hour, I then started experiencing one way speech between the IP phones and the analogue phones.
on incoming calls vis the Telco, speech is fine towards the analogue phones, but when the caller dials an IP phone the called party cannot hear the caller.
I have made changes to the codecs and the highways as the problem seems to happen when the system gets a little busy.
I have a GPZ-128IPLD installed on my SV9300.
Is there any other solution to resolve the one way speech, I have also replaced the GPZ-128IPLD card as well.
I have uploaded the system backup and the system config.
on incoming calls vis the Telco, speech is fine towards the analogue phones, but when the caller dials an IP phone the called party cannot hear the caller.
I have made changes to the codecs and the highways as the problem seems to happen when the system gets a little busy.
I have a GPZ-128IPLD installed on my SV9300.
Is there any other solution to resolve the one way speech, I have also replaced the GPZ-128IPLD card as well.
I have uploaded the system backup and the system config.