Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

one way fax transmission over DID

Status
Not open for further replies.

999said999

Technical User
May 19, 2008
9
OM
Hello,
We can send fax through DID (with the service provider) to any PSTN line with no problem. Also, we can receive fax from a GSM modem (in area where there is no land line, a sim card with fax/data feature is used with the GSM modem that gives a fax/telephone port) connected to a fax machine, but we can not send fax to that same GSM modem.
Any ideas? should we change any of our PRI parameters ?
Thanks
 
Did this problem just start? We have found that sometimes when the CO changes out to a VoIP switch that it causes havoc on our modems and fax machines. Often they compress too much. In one instance, faxes had problems on a PRI but no problems on copper.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top