Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

One way audio between Lan1 and Lan2 3

Status
Not open for further replies.
jlk53

jlk53

Technical User
Mar 22, 2005
414
0
0
US
I am trying to do something that might be impossible but you folks have worked wonders before.

Lan 1 has IP 10.232.206.59. There are 30 ip phones. everything works great.

Lan 2 has IP 192.168.43.1. There are 10 ip phones. Lan 2 is connected to a local loop to a remote site. On the end of the local loop is a POE switch and then the phones. On the PBX end line goes directly from local loop to Lan 2.

IP routes:
10.232.206.0
255.255.255.0
192.168.43.1
Lan2

192.168.43.0
255.255.255.0
10.232.206.62
Lan1


Phones on Lan2 can make local calls outside the PBX no problem but when they either make or receive a call to a extension on Lan1, there is one way audio.

Any help would be appreciated
 
Sort by date Sort by votes
Set the gateway address correctly on the phones on both network segments. I suspect it is not on one or both ends.

You shouldn't need to program IP Routes for segments to which the IP Office is directly attached. It know about them already from what is set in the LAN config pages.

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer
 
Upvote 0 Downvote
Thanks for the quick replies. I will turn "direct media path" off tomorrow.

The phones on the Lan 2 port are directly connected. Would I use the 192.168.43.1 as the phone gateway?

Thanks
 
Upvote 0 Downvote
Yup

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer
 
Upvote 0 Downvote
Thanks Guys, Direct Media Path did it.
 
Upvote 0 Downvote
turning off direct media path just forces the call to use a vcm resource, this is only a bandaid and the real issue still needs to be resolved!

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Upvote 0 Downvote
It doesn't force a VCM resource, the system will use RTP relay to pass the voice between handsets, no VCM required. When using the system as the router as the OP is then DMP being on/off makes no difference as traffic will traverse the system regardless :)

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Rhinorhino
  • Question
9611 one way audio
Replies
1
Views
218
Westi
Westi
dsm600rr
  • Locked
  • Question
One Extension Occasionally gets one-way audio on internal calls
Replies
0
Views
90
dsm600rr
dsm600rr
BerettaGuy
  • Locked
  • Question
IP phone on VPN one way audio 2
Replies
2
Views
111
Westi
Westi
cheikhdtn
  • Locked
  • Question
Lan1/Lan2
Replies
2
Views
39
IPGuru
IPGuru
tnestel
  • Locked
  • Question
No audio on toll free number
Replies
2
Views
77
tnestel
tnestel

Part and Inventory Search

Sponsor

Back
Top