One TN ringing on two phones

[kellygirl01]

Hi all,

What's the best way to get 1 TN to ring on 2 different phones?

 

[johnpoole]

if it;s a digital set just make the keys both scr xxx and that put a ringing line on any phone, i perfer mcr but you might want to read software feature guide, if you nee the exact prompts, just reply

john poole
bellsouth business
columbia,sc

 

[kellygirl01]

The prompts would be great if possible

 

[johnpoole]

the stat type tn and dn depend on your local switch, 1st fo to 20 and prt, dnb (exten) of one of the phones you eant to change. note the tnb (soft/hard address of the set that the has MARP beside it)
REQ:
REQ PRT
TYPE:
TYPE DNB
CUST
DN 1962
DATE
PAGE
DES

CUST 00


DN 1962
CPND
NAME John
XPLN 5
DISPLAY_FMT FIRST,LAST
TYPE MIX
TN 088 1 02 00 DES D 14 JUN 2004
TN 064 0 14 14 KEY 01 DES SWITCH 25 JUN 2004
(2616)
TN 064 0 14 14 KEY 00 H MARP DES SWITCH 25 JUN 2004
(2616)


in my case a 2616 at 64 0 14 14,
then (same load)
prt
tnb
64 0 14 14, if your switch is smaller opt 11, then just 6 14 format for tn
return 3 or 4 times and look at the set

the keys are very clear at the lower side of that page.


key 0 is bottom right, once you have the tn, key number and ext that you want to use, try this one
REQ: chg
TYPE: 2616
TN 64 0 14 14
ECHG yep
ITEM key 1 scr 1962
HNT FNA
MARP ON TN 064 0 14 14
MARP no
CPND
VMB
KEY
ITEM
MIX
.. all this can be accessed from ld 20,
i'll be here for another half hour so don't delay and i'll talk you through this one


john poole
bellsouth business
columbia,sc

 

[johnpoole]

if my garble is unclear, call me in the switch room 803 434 4940.

john poole
bellsouth business
columbia,sc

 

[kellygirl01]

Thanks, I'll try it out!