Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OM1 AND OM2 FIBER CONNECTORS 1

Status
Not open for further replies.
syn0324

syn0324

Programmer
Jan 14, 2005
3
0
0
US
I have a box of OM2 ST fiber connectors, can I use the OM2 connector on a 62.5 fiber? And can I use an OM1 connector on a 50um fiber? This question is just for fiber runs under 700'
 
Sort by date Sort by votes
Depending upon the style of connector, the 62.5 micron fiber should not fit into an OM2 connector. The 50 micron will be too small for the OM1 connector. Even if you could get it to work, it would not last, and the connection would be spotty at best.

Spend a little $ and get the right connector for the fiber.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

billmcgrady
  • Locked
  • Question
Any fiber optic experts? Re Termination question... 3
Replies
9
Views
218
libellis
libellis
dima-m
  • Locked
  • Question
DTX failure in ACR and RL
Replies
1
Views
81
libellis
libellis
dima-m
  • Locked
  • Question
fiber inspection testing (viavi)
Replies
2
Views
64
cpolley1
cpolley1
skyzone
  • Locked
  • Question
Cable combs and sequential ordering
Replies
0
Views
76
skyzone
skyzone
DallasTXtech
  • Locked
  • Question
Grounding and Bonding Requirements on 1" EMT Pipe for CAT6 runs.
Replies
8
Views
157
Wanebo
Wanebo

Part and Inventory Search

Sponsor

Back
Top