Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

old BCM450 (without user or pwd) I hava an external backul on my pc

Status
Not open for further replies.

sky24007

Technical User
Jan 11, 2012
3
Hi all,
I have one BCM450 but I dont't know user or pwd , I tried default user and pass without success . I have on my pc a backup from another BCM450 .

Is there something to do with this two to make a working BCM450 ?

Thanks !
 
I can ping the pbx at 10.10.11.1
255.255.255.252
if i try to login to the system only at user ee_admin I get the prompt to type the password
I tried a lot of password PlsChgMe! and more that I could fine over internet .

The pbx is only for practice lab,is bought from the internet

@firebirdscrambler I don't have none of those phones... :(
 
e_admin is not used on a BCM450/ bcm 4.0 as a default user name.
That only related to old bcm 3.0 to 3.7.

Also if this is the first time this system is used then you will be forced to change the password from the default.
You might be lucky and the original password has been reused
Try user:nnadmin and the default password.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top