old BCM450 (without user or pwd) I hava an external backul on my pc

[sky24007]

Hi all,
I have one BCM450 but I dont't know user or pwd , I tried default user and pass without success . I have on my pc a backup from another BCM450 .

Is there something to do with this two to make a working BCM450 ?

Thanks !

 

[ECartman]

Level 2 reset or call Avaya for a password of the day.

 

[Firebird Scrambler]

Are you sure that you have the correct IP address?. Try this guide below.

http://www.ghtrout.com/files/How_to...dress_details_on_an_unknown_BCM_50_system.zip

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[sky24007]

I can ping the pbx at 10.10.11.1
255.255.255.252
if i try to login to the system only at user ee_admin I get the prompt to type the password
I tried a lot of password PlsChgMe! and more that I could fine over internet .

The pbx is only for practice lab,is bought from the internet

@firebirdscrambler I don't have none of those phones...

 

[cmawbey]

try user nnadmin

 

[snowman50]

e_admin is not used on a BCM450/ bcm 4.0 as a default user name.
That only related to old bcm 3.0 to 3.7.

Also if this is the first time this system is used then you will be forced to change the password from the default.
You might be lucky and the original password has been reused
Try user:nnadmin and the default password.