Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Office Serv 7070 incoming calls rejected

Status
Not open for further replies.

korexxkun

Programmer
Jun 26, 2011
33
NG
Hi all,
Ive got a samsung officserv 7070 Ip Pbx. Calls are going out but calls cant come in. The Service Provider claims there are no DID restrictions to the PBx and the PBx's IP is rejecting the calls.
What MMC's/configuration do i need to check/configure to make sure i can receive calls. I know this is a very beginner question but im really stuck here and icould use some advise no matter how small
 
Its using SIP

3.2.3 DID Ringing

The are digits configured under the incoming digits 4***, 2***, etc
There ought to be a DID number from the service provider right? So far i can only find the CLI
 
you should put the incoming DID in that list and put the extension you want to ring in all 6 of the ring plans.


what is the destination of the 4***,5***? Is it the letter B?
 
Have you had the RTP ports mapped through on the router/firewall?

Systems
Helpline &
Information
Technology
Engineer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top