Office Point (non Hicom) reset procedure

[ISDNman]

Hi,

I am working on the small office Office Point system. It is not a HiCom Office Point.

I have the manual and am trying top program this, but I am running into problems. I keep finding settings from the previous owner.

I have worked on these before and am pretty sure the problems I am seeing are related to stuff that remains from the previous installation.

What I really want to do is to start from scratch, but I find no way to reset the system to the factory defaults.

Thanks

-------------------------------------------

TIP: If you ask a better question, you will get a better reply. Be specific so we can help!

 

[Monrovia]

open the cabinet of the office point system. inside you can see the reset button.

as you have the installation manuals, you can confirm it in the book.

 

[Bas1234]

Hold the reset button for 5 seconds, then it will do a hard reset and that clears all settings.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________