Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
off switch divert not working
- Thread starter ptaboys96
- Start date
There is a tick box in system telephony for inhibit off switch calls, this stops calls being diverted off switch.
If you are using alog trunks there is a setting in the trunks for allow forwarding. If this isnt ticked it will stop it.
If it is a hunt group call you are trying to forward you can only forward calls from groups that are set to rotary or hunt. Also you need to tick forward hunt group calls if this is the scenario.
If you are using alog trunks there is a setting in the trunks for allow forwarding. If this isnt ticked it will stop it.
If it is a hunt group call you are trying to forward you can only forward calls from groups that are set to rotary or hunt. Also you need to tick forward hunt group calls if this is the scenario.
- Status
Similar threads
- Question
